Omnimount 10.0 W_C Manual de Bedienungsanleitung PDF herunterladen

10.0 SPEAKER MOUNT USER’S GUIDE

REQUIRED TOOLS

A. 5/32” hex wrench (supplied)

Drill bits:

B. Wood 5/32”

C. Drywall - ¼”

D. Masonry - 5/16” carbide tipped

E. Crescent or 7/16” (11mm) open end wrench

F. Phillips screwdriver

G. Electric drill

H. Hammer (masonry only)

MOUNTING OPTIONS

Possibilités de montage

Posibilidades de instalación

Montagemöglichkeiten

Opzioni di montaggio

Montageopties

1. SPEAKER OPTIONS

A) ¼” 20 Threaded Insert C) Mounting Plate

B) Keyhole Insert D) Wood Speaker Without Threaded Inserts

Use 3/32” drill bit (supplied)

Maximum drill depth: ½”

2. CLAMP ASSEMBLY ORIENTATION

A) Wall Mount

A) Ceiling Mount

3. MOUNTING THE CLAMP ASSEMBLY

A) Mark Location

Mark mounting holes with pencil

B) Mounting onto Wooden Stud. Use 5/32” drill bit

Minimum mounting hole depth: 2” (51mm)

C) Drywall Mounting

Use ¼” drill bit

Insert anchor into hole

D) Mounting into Masonry

5/16” (8mm) carbide tipped bit and masonry or hammer drill.

Wear eye protection.

Minimum mounting hole depth: 2” (51mm)

Insert anchor into hole

E) Mount Clamp Assembly

Attach clamp assembly with supplied screws.

4. JOINING BALL SHAFT AND CLAMP ASSEMBLY

Open clamp assembly enough to accept ball.

“Pop” ball into the clamp assembly.

Set speaker to desired position.

Tighten clamp assembly until snug.

Note: Speaker weight must be fully supported

during the tightening process.

5. FINAL ADJUSTMENTS

Use tool to tighten in 1/2 turn increments.

Do not over tighten.

To change speaker angle, loosen tension screw,

re-position speaker, then re-tighten tension screw.

To rotate speaker cabinet, loosen jam nut, rotate

speaker into desired position, then re-tighten jam nut

PART#: 1002013

1 2 3

A) Wall Mount 1
A) Ceiling Mount 1

Inhaltsverzeichnis

Seite 1 - A) Ceiling Mount

10.0 SPEAKER MOUNT USER’S GUIDE REQUIRED TOOLSA. 5/32” hex wrench (supplied)Drill bits: B. Wood 5/32” C. Drywall - ¼” D. Masonry - 5/16” c

Seite 2

10.0 SPEAKER MOUNT USER’S GUIDEManuel de l’utilisateur Omnimount 10.0 Guía del usuario del Omnimount 10.0 Omnimount 10.0 Benutzerhandbuch Omnimou

Seite 3

I) Portata:10.0: 10 lbs./4,5 KgAttrezzi per l’installazioneA. Chiave esagonale da 5/32" (in dotazione) (3,97 mm)Punte da trapano: B. Legno 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Omnimount 10.0 W_C Manual de Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Möbel Omnimount 10.0 W_C Manual de herunter. Omnimount 10.0 W_C Manual de User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Möbel Omnimount 10.0 W_C Manual de